HPE Ethernet 10Gb 2P 560SFP+ Adptr

Add To Wishlist Compare Compare
SKU: 665249-B21 Category:

Description

Lifecycle

  • Obsolete Date 31-01-2023
  • End of support date 31-01-2028

Specifications

  • Power Typical – 10.0W Max – 10.8W
  • Network processor Intel® 82599 Controller
  • Protocol supported 802.3, 802.1ab, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.1au, 802.3ap, 802.1as, 802.3ak,802.1qaz, 802.1Qbb
  • Network controller Intel 82599 Ethernet Controller
  • Port speed 10 GbE
  • Weight 0.45 kg
  • Product dimensions (H x W x D) 2.25 x 9.5 x 7.5 in
  • Minimum dimensions ( H x W x D) 5.72 x 24.13 x 19.05 cm
  • Transfer rate 10 Gb/sec Per Port
  • Data rate 10Gb per port, 20Gb Total
  • Form factor Stand Up
  • Supported Cables Active Optical Cable (AOC) Direct Attach Copper (DAC)
  • Bus type PCIe Gen2 x8
  • IEEE compliance 802.3, 802.1ab, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.1au, 802.3ap,802.1as, 802.3ak,802.1qaz, 802.1Qbb
  • Compatible operating systems Microsoft Windows Server 2008, Server 2008R2, and HPC Server 2008, 32 and 64-bit Microsoft Windows Server Hyper-V Microsoft Windows Small Business Server 2011 Red Hat Enterprise Linux 5.7 and 6.1 SLES 10 and 11 VMware 4.1u2 and 5.0u1 Solaris 10
  • Connector type SFP+
  • Server type supported ProLiant servers
  • Power availability 10W (maximum)
  • Warranty Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three-year, limited warranty). Minimum: One year limited warranty.
  • Technology Network processor
  • Weight 1 lb

Quickspecs

Overview

Do you need a dual-port 10GbE low-cost, low-power adapter designed for your HPE ProLiant Gen8 and select G7 ML/DL/SL server? The HPE Ethernet 10Gb 2-port 560SFP+ Adapter features both low-cost and low-power in a dual port PCIe v2.0 x8 form factor. The HPE 560SFP+ addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization and scalability that complement the HPE Gen8 server platform. The HPE 560SFP+ comes with both low profile and standard brackets and has two SFP+ cages that enable connections with DACs as well as SR fiber optic modules. It is SR-IOV ready and supports high performance networking features such as VLAN tagging, low latency interrupts, TCP and UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, and PXE boot.

Features

Addresses the Demanding Needs of the Next Generation Data Center

The HPE Ethernet 10Gb 2-port 560SFP+ Adapter is an easy to install and configure PCIe v2.0 x8 adapter that fits in a standard PCIe slot and comes with low profile and standard brackets. Two SFP+ cages enable connections with DACs and SR fiber optic modules.

Delivers 20 Gb/s full duplex Ethernet transfer rate per port (40 Gb/s aggregate).

New I/O technologies increase performance, reduce system power and I/O latency, and support Precision Time Stamping protocol (IEEE 1588 and 802.1AS).

Optimized for virtualization (VLAN tagging, NetQueue, VMQ, VMDq).

Supports Wake-on-LAN (WOL) at 1 Gb, PXE, MSI-X, NIC teaming, IPv6, and HPE Sea of Sensors 3D Technology.

Compatible products

Documents

Additional information

Producator

HPE

Garantie

12

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.